Powered By Blogger

2016年5月5日木曜日

開発環境とファン設計

研修期間やGWに少しだけ作業した.

はじめに,前回入手したPCの開発環境を整えた.
Windows10でも意外と使用する全ソフトが利用できた.
ただし,何となくわかっていたが,コンパイラやPython周りがやや面倒だった.ソフトのバージョンが違うとか32bitから64bitのOSに変更したとか云々.

あとは何となく3DCADでファン設計.ツールはAutodesk Fusion360.2DのAutoCADは使っているので同じ会社の無料ソフトを選択.
2Dのソフトと完全に同じ感覚で操作できるわけではないようだが,半日程度でそれっぽい形のファンが描けた.
さて,このファンが無事に機能するといいが…

2 件のコメント:

  1. how did you ended up decide the shape of your fan blades?

    返信削除
  2. I have no idea. I just mimicked Mr. Utsunomiya's design.

    http://blog-imgs-88-origin.fc2.com/h/i/d/hidejrlab/SDN7.jpg


    What I can say is:
    1 Smalller attack angle makes smaller air resistance. It makes the speed of fan higher. Stronger suction force is acheved.
    2 However, if the sweep area is same, lower attack angle needs longer blade. So the fan gets heavier and more torque is needed.
    3 On the other hand, lower attack angle makes air resistance smaller, so thinner blade can be used. It leads lower fan weight.

    So I think it is very difficult to decide the best shape of fan. May be try and error is best way to decide.

    返信削除